How to Change Engine Oil and Filter at Home

March 14th, 2018 by

Keeping a car in good condition is important for many reasons. Not only will the car last longer, but proactive drivers save money on costly repairs down the line. Changing engine oil and filter regularly is an essential task that, with some guidance, can be done at home in very little time without getting too dirty.

Many people performing this task at home continue to make simple mistakes, turning a simple job into quite a mess. While others leave this task for their local Libertyville auto garage, changing oil at home is a great way to save money and get to know the ins and outs of a car. Most importantly, changing oil regularly is the number one chore to make sure a engine lasts a long time.

What follows is a quick step-by-step guide to changing engine oil and filter at home.

  1. Buy the Right Oil and Filter

Before beginning the oil-change process it is important to purchase the right type of oil and filter and to have them ready for installation. The owner’s manual of any vehicle, such as a Volkswagen Passat available at dealerships in Libertyville, will list the engine’s specified oil viscosity. This is particularly important for newer cars as higher-functioning modern engines can be more sensitive. Improper oil selection can lead to poor performance or engine damage leading to costly repairs.

It is equally important to ensure the right filter is selected for a given engine. High quality oil can only function in proportion to the quality of the filter. This means that expensive synthetic oil will not last with a cheap filter. High quality oil and filter is a win-win situation, providing optimum engine care that lasts longer, saving money long-term.

  1. Change Oil the Fast Way

Highly efficient auto garage workers can change an engine’s oil within a quarter hour. Here’s how the professionals get the job done:

    1. Pull the Plug

The engine oil plug will be marked on the underside of vehicle. Make sure there is a bucket under the plug before removing. For maximum efficiency, make sure to pull the plug away from the oil stream as quickly as possible. This avoids any messy oil cleanup.

    1. Remove and Replace the Oil Filter

Once the engine oil has drained out, crank off the oil filter off along with the rubber gasket underneath.  Once this has been removed and surrounding area cleaned, the new filter may be installed and the plug replaced.

    1. Add Fresh Oil

Using a funnel, pour the fresh oil into the engine from above. Watch carefully to avoid messy overflow. Seal the oil cap and the engine is ready to go.

    1. Recycle Old Oil

Used oil can easily be recycled for other uses. Rather than throwing a jug in the trash, consider bringing it back to the auto garage on the next visit.


Posted in Uncategorized